so i threw some injector codes for cylinder 4 and i took them out to get them flow tested/ cleaned/ tested again these were the results. Does this look good ? i dont know much about the flow rates and such.
all testing was done at 45 psi and at 11.7 ohms for 30 seconds
cylinder 1 before 115cc after 130cc
cylinder 2 before 120cc after 130cc
cylinder 3 before 120cc after 131cc
cylinder 4 before 105cc after 130cc
I dont know how to calculate the cc to psi to see and i wish they tested them atleast at 43.5 psi that is standard pressure at idle.